Incense Holders

Potion Bottle Incense Holder for Cone Incense

£8.90

A fun incense holder In the shape of a potion bottle.

It used cone incense, which sits on a detachable stand at the bottom, and the smoke emerges from the top of the bottle to create a spooky and mystical effect.

The item comes boxed and with full instructions.

It measures 13cm (5 and 1/4 inches) tall.

Black Terracotta Incense Holder with Crescent Moon

£4.50

A neat and stylish incense holder made from terracotta with a crescent moon and star raised design and with a matt black finish.

There's a central hole to take an incense stick so the stick is held vertically over the holder and any ash falls into the dish.

You can also use this dish for incense cones - the hole doesnt go all the way through, so you could just place a cone on the raised central area.

Silver Metal Buddha Incense Holder

£6.50

This buddha incense holder is made of metal, ideal for burning an incense cone.

The incense fits into a circular recess in front of the meditating buddha figure.

The holder is made from cast silver metal. It measures 7cm (2 and 3/4 inches) in diameter and 4cm (1 and 1/2 inches) tall.

Silver Metal Buddha Leaf Incense Holder

£6.75

A little buddha figure sits on a richly decorated leaf-shaped plate that will hold a stick of incense, or a cone.

The leaf shape is nicely decorated with patterns of flowers and foliage.

The holder is made from cast silver metal. It measures 9.5cm (3 and 3/4 inches) across and 12cm (4 and 1/2 inches) from front to back.

Silver Metal Sun Face Incense Holder

£6.00

A smiling sun face adorns this circular incense holder. It will accommodate up to three incense sticks.

The holder is shaped like a dish, with the sun face as a central raised boss.

It's made from cast silver metal. It measures 9.5cm (3 and 3/4 inches) in diameter.

Bronze Metal Lotus Incense Holder

£6.85

A lovely metal incense holder in the shape of a lotus flower.

The lotus petals rise up to form the body of the bowl, whilst the pierced lid is decorated with flowers and animals.

The lid lifts off, and inside you can place either cone incense or resin incense. You can also use this to burn sticks incense, since you can stand the sticks upright using the pierced patterns in the lid.

The holder is made from solid metal with a bronze finish. It measures 7cm (2 and 3/4 inches) in diameter and 7cm (2 and 3/4 inches) tall.

Black Cast Metal Incense Holder

£7.50

A very nice cast metal incense holder with perforated lid.

The body of the burner is a flat-bottomed bowl. Its three legs make it very stable and safe to use.

The lid is pierced with a pattern of geometric shapes, so the smoke from the incense can escape through the holes.

Inside you can place either cone incense or resin incense.

The holder is made from solid cast metal with a black finish. It measures 8.5cm (3 and 1/4 inches) in diameter and 7cm (2 and 3/4 inches) tall.

Silver Pentacle Incense or Candle Holder

£9.00

A very nice holder for cone incense with a cut-out pentacle design. It's made of highly polished silver metal.

The incense goes inside the pan at the top, and is covered by the perforated lid, which is separate. If you remove the lid, this can also be used as a candle holder.

You can use an incense cone, or you can use a charcoal disc and resin incense.

The holder (the pentacle part) is 11cm (4 and 1/4 inches) high. The whole assembly, when the top is added, is 18cm (7 inches) high.

Silver Goddess Incense Holder

£14.50

A lovely holder for cone incense in the shape of a stylised goddess figure. Beautifully cast in heavy silver metal with spiral decoration to both sides.

The incense goes inside the pan at the top, and is covered by the perforated dome, which is separate. If you remove the dome, this can also be used as a candle holder.

The holder (the goddess part) is 155mm (15.5cm or 6 inches) high. The whole assembly, when the top is added, is 230mm (23cm or 9 inches) high.

Silver Tree Incense Holder

£13.05

An elegant incense holder in a tree of life design.

The heavy base is decorated with a pattern of roots, and the cup the incense goes in is supported by a stylised tree cut from silver metal and polished to a high shine.

There is a separate lid, which is pierced to let the incense smoke through, and which has a long handle. However, the handle is on a screw thread, so you can remove it easily if you prefer to have an extra hole for the incense to come through instead.

The holder is 200mm (20cm or 8 inches) tall when fully assembled.

Silver Lotus Incense Holder

£13.05

An elegant silver metal incense holder in a lotus flower design.

The heavy base is decorated with a swirl of tendrils, like lotus roots as they grow in the water, and the cup the incense goes in is supported by a stylised lotus flower cut from silver metal and polished to a high shine.

There is a separate lid, which is pierced to let the incense smoke through, and which has a long handle. However, the handle is on a screw thread, so you can remove it easily if you prefer to have an extra hole for the incense to come through instead.

The holder is 200mm (20cm or 8 inches) tall when fully assembled.

Porcelain Spirit Board Incense Holder

£4.50

A very nicely made incense holder made of porcelain with a black gloss glazed finish and a printed spirit board design. There's a central planchette motif in white and other design elememnts - part of the alphabet section and medallions depicting the sun and the moon - are in a silver grey.

The holder is 255mm (10 inches) long and 38mm (1 and 1/2 inches) wide.

There is a hole to take an incense stick in the raised end, but incense cones could be placed anywhere along the surface of the holder.

Silver Metal Pentacle Incense Holder

£4.00

A lovely incense holder made from silver metal with a pentacle design carved into the end. There's a hole in the end to take an incense stick, and a cone of incense would go anywhere on the surface.

The holder has a channel running down the length to catch the ash from your incense. It's really very nicely made.

Straight Wooden Incense Holder with Tree Brass Inlay

£1.89

A nice incense holder made from Indian hardwood with a brass tree of life design inlaid into the end and stars along the sides. There's a hole to take an incense stick so the stick is elevated over the length of the holder.

The holder has a channel running down the length to catch the ash from your incense.

Black Soapstone Pentacle Incense Holder

£6.00

A hand-carved incense holder made from black soapstone with a pentacle design. There's a hole in the corner to take an incense stick, and a cone of incense would go anywhere on the surface.

The holder is shaped to form a shallow bowl. It's a durable and beautifully crafted item.

It measures 10cm (4 inches) square.

Purple Soapstone Pentacle Incense Holder

£6.00

A hand-carved incense holder made from purple soapstone with a pentacle design. There's a hole in the corner to take an incense stick, and a cone of incense would go anywhere on the surface.

The holder is shaped to form a shallow bowl. It's a durable and beautifully crafted item.

It measures 10cm (4 inches) square.

Black Soapstone Tree Incense Holder

£6.00

A hand-carved incense holder made from black soapstone with a tree of life design. There's a hole in the corner to take an incense stick, and a cone of incense would go anywhere on the surface.

The holder is shaped to form a shallow bowl. It's a durable and nicely made item.

It measures 10cm (4 inches) square.

Round Wooden Incense Holder

£3.50

A nicely made round wooden incense holder, in a nice plain shape. You can stand a single incense cone in the central metal recess, or you can place up to three sticks in the holes that surround it.

The holder is 100mm (10cm or 4 inches) in diameter.

Raven Ashcatcher Incense Holder

£6.25

A raven sits atop a mound of graveyard earth, the ground around him littered with bones. An incense stick can be inserted between the raven's feet and the ash will fall into the recess on the holder.

This ornament is 80mm (8cm or 3 and 1/4 inches) tall and 250mm (25cm or 10 inches) in length.

Green Man Tree Incense Holder

£6.90

A green man incense holder suitable for incense cones, made of durable resin and hand-painted. It consists of a base on which to stand your incense cone, and a cover (the trunk and face of the tree man) that fits over it, funneling the smoke out of the top.

The holder, including the base, is 120mm (4 and 3/4 inches) high.

Witch Hat with Cat Incense Holder

£6.90

An incense burner in the shape of a black witches' hat with a cat perched on its brim.

The hat lifts off a circular base on which there is a central raised disc where you put an incense cone. When lit, the smoke will then drift upwards, through a hole in the top of the hat. There's a hole in the back, too, so air is drawn inside and over the burning incense.

The burner is 120mm (12cm or 5 inches) tall and 110mm (11cm or 4 and 1/2 inches) across.

Celtic Man Incense Holder

£4.95

A handsome incense holder that you can use for either cone incense (on the circular recess at the flat end) or stick incense (using the little hole within the mouth). This is a very sturdy holder made from cast resin, ivory-coloured with an antique patina.

It features a celtic style face whose beard resolves into a knotwork design that runs the length of the holder.

The holder is 240mm long and 50mm across (9 and a half inches by 2 inches).

Little Tortoise Incense Holder

£1.60

A cute little glazed ceramic tortoise with a hole to fit an incense stick.

We have these in just the black now. To order, please go to the product page.

The tortoises are 50mm (5cm or 2 inches) long and 25mm (2.5cm or 1 inch) high.

Silver Metal Owl Incense Holder

£6.50

A cute little owl sits at the end of this incense holder. There's a hole for a single incense stick, or you could stand a cone on it anywhere.

The holder is shaped like a long leaf, decorated with a design of flowers and leaves.

It's made from cast silver metal. It measures 22cm (8 and 3/4 inches) in length and 5cm (2 inches) across.

Medium Gunmetal Pentagram Cauldron

£15.90

Heavy cast metal cauldron in a natural gunmetal finish. You can use these for burning herbs or for incense. There is a pentacle motif in relief on each side of the body of the cauldron.

They are very solid and robust, and have a rigid silver metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 120mm (12cm or 4 and 13/4 inches) tall and 130mm (13cm or 5 and 1/2 inches) across. That's the height of the actual cauldron, not the height if you lift up the handle and measure to the top of that.

Medium Gunmetal Triple Moon Cauldron

£15.90

Heavy cast metal cauldron in a natural gunmetal finish. You can use these for burning herbs or for incense. There is a triple moon motif in relief on each side of the body of the cauldron.

They are very solid and robust, and have a rigid silver metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 120mm (12cm or 4 and 13/4 inches) tall and 130mm (13cm or 5 and 1/2 inches) across. That's the height of the actual cauldron, not including the handle.

Small Gunmetal Pentagram Cauldron

£14.00

Heavy cast metal cauldron in a natural gunmetal finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a pentacle motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid silver metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 95mm (9.5cm or 3 and 13/4 inches) across. The first measurement is the height of the actual cauldron, not including the handle.

Small Gunmetal Triple Moon Cauldron

£14.00

Heavy cast metal cauldron in a natural gunmetal finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a triple moon motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid silver metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 95mm (9.5cm or 3 and 13/4 inches) across. The first measurement is the height of the actual cauldron, not including the handle.

Small Black Pentagram Cauldron

£13.50

Heavy cast metal cauldron in a black enamel finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a pentagram motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid black metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 100mm (10cm or 4 inches) across. The first measurement is the height of the actual cauldron, not including the handle.

Small Black Triple Moon Cauldron

£13.50

Heavy cast metal cauldron in a black enamel finish, in a traditional pot-bellied cauldron shape.

These are perfect for burning herbs or for incense. There is a triple moon motif in relief on each side of the body of the cauldron.

They are very solid and robust little cauldrons, and have a rigid black metal handle. They stand on three legs, which makes them very stable.

The cauldrons are 110mm (11cm or 4 and 1/2 inches) tall and 100mm (10cm or 4 inches) across. The first measurement is the height of the actual cauldron, not including the handle.

Plain Straight Wooden Incense Holder

£1.79

A nice incense holder made from plain dark polished wood. There's a hole in the end to take an incense stick.

The holder has a channel running down the length to catch the ash from your incense. Simple and does the job.

Straight Wooden White Wash Incense Holder with Crescent Moon

£2.00

A nice incense holder made from Indian hardwood with a crescent moon and stars design that's accentuated by a wash of white paint. There's a hole to take an incense stick so the stick is elevated over the length of the holder.

The holder has a channel running down the length to catch the ash from your incense.

Silver Buddha Incense Holder

£4.75

A beautiful silver coloured buddha figure sits on a plate that will hold four sticks of incense, or a cone.

The incense fits into (or onto) the raised platform in front of the figure.

The holder is made from cast resin and plated with silver. It measures 9cm (3 and 3/4 inches) in diameter and 9cm (3 and 3/4 inches) tall.